Loading Ramp

Single and double with a capacity of 6/6,5/8/10 tons, which are used in truck loading areas, cold air outlet areas  and are designed to allow the passage of equipment such as forklifts, pallet trucks or hand trolleys to the truck during loading, operating with hydraulic system, hinged and telescopic.

SKU: OZB-004 Category:

Description

Single and double with a capacity of 6/6,5/8/10 tons, which are used in truck loading areas, cold air outlet areas  and are designed to allow the passage of equipment such as forklifts, pallet trucks or hand trolleys to the truck during loading, operating with hydraulic system, hinged and telescopic. It is roller level adjuster loading equipment. The loading ramp is generally used in factory storage areas and dispatch areas. In order to prevent the surface loading vehicle from slipping, the sheet metal is laid with tear pattern sheet metal. It is fully automatic. In places where the loading area is not suitable for the height of the truck, it moves in the form of a slope and allows you to enter the vehicle. There are ramp systems such as hinged ramp, vertical ramp, telescopic ramp, mobile ramp, mobile ramp placed in the pit.

1.RAMP PLATFORM FEATURES

1.1. Platform dimensions are 2000x2500mm.
1.2. Platform material is made of high quality steel with a wall thickness of 6-7mm and the sheet surface is patterned and prevents tire slippage.
1.3. The platform supports 120 NPI.
1.4. The ramp color is black with yellow stripes on the sides. Stay before the ramp coat of Epoxy primer was applied and then painted with Epoxy paint.
1.5. There is a safety bar for maintenance.
1.6. The rise and fall of the platform is adjustable.
1.7. The piston shaft thickness that lifts the platform is minimum 50mm.
1.8. There is a hose burst valve on the piston that lifts the platform.

2.RAMP FEATURES

2 .1. The hinged tongue length is 400 mm minimum.
2 .2. The sheet used in the hinged tongue is 12-13mm thick, the sheet surface is patterned prevents tire slippage.
2 .3. The tip of the hinged tongue is angled to facilitate pallet truck and forklift exit.
2 .4. The piston rod used in the hinged tongue is at least 30mm thick and 140mm stroke.

3.HYDRAULIC SYSTEM

3.1. There is a 380V 50 Hz motor.
3.2. Engine power is at least 1.1 Kw.
3.3. Parts used in the hydraulic system (pump, valve, valve, etc.)
3.4. A 24V dc valve is used in the hydraulic system.
3.5. The operating temperature is minimum -20 +70 °C.
3.6. There is a thermal switch fuse in the control panel.
3.7. The control panel complies with the IP 55 protection class.

4.RAMP GENERAL CHARACTERISTICS

4.1. To prevent time loss while the ramp is in the air, the tongue can be closed with a separate button.
4.2. The maximum live load that will pass over the ramp is 6000 kg.
4.3. Rubber bumpers are installed on both sides of the ramps.
4.4. Ramp is guaranteed for 2 years against all kinds of fabrication faults.
4.5. Ramps are guaranteed to have spare parts for 10 years.

Dokumanlar video ve fotoğraflar eklenecek.

CALL NOW